Can you wax graphite golf shafts?

While you may not need to clean and polish your steel shafts very often, graphite should have regular cleaning and sealing. I recommend that you clean your graphite shafts with water only. … After cleaning and drying apply one or more coats of a good furniture wax, (i.e. Johnson’s), or a specialty product (Shaft Wax).

How do I protect my graphite golf shafts?

Long-neck head covers are one way to protect graphite shafts from nasty scratches, but generally just keeping them clean is the best thing to do. Since solvents can break down the polyurethane layer, it is advisable to clean graphite shafts with water and a soft cloth.

Why dont pro golfers use graphite shafts?

That being said, most professional players prefer to use a graphite shaft for their woods, because they give a smoother stroke at the very highest swing speeds. For their irons, professional players tend to prefer steel iron shafts because they offer consistency and rigidity.

How do you clean graphite shafts?

The best way to clean your golf shafts is quite simple. Get a small towel slightly moist and wipe them down. Use your other towel to dry them off. If you notice some rust or dirt, you can use your golf club cleaner mixture (lukewarm water & liquid detergent) and your brush.

THIS IS EXCITING:  What is the rule for marking a golf ball?

How do I protect my golf club shafts?

If you’re playing a round in the rain, be sure to use a rain cover on your bag to protect the shafts from damage and prevent dampness in the bag interior. Check your clubs regularly for rust. Mild rust can be buffed away with a fine grade steel wool.

Can I sand a graphite shaft?

If using a belt sander, I would recommend a graphite shaft sanding belt rather than a normal sanding belt as not to take too much material as fast. Hand sanding can be accomplished by using a 1″ wide strip of medium grip sandpaper and use a shoeshine method to evenly sand around the shaft tip.

Can you replace steel shafts with graphite?

On golf clubs that are not forged, light work will still be included, but you can replace the steel shafts with graphite. You will have to heat the clubhead and remove it, and you may have to buy a new grip. It’s a little involved, but completely doable.

What is prepping a golf shaft?

Shafts: Lightly sand shaft from tape to tip with 150 grit or finer sand paper to remove the polyurethane finish and all the paint. This operation is “prepping” the shaft and can be done by The GolfWorks (PREP).

When should I switch to graphite shafts?

Historically speaking, steel shafts have been better for more advanced or higher swing speed players. Graphite has been more ideal for people with more moderate swings or players wanting maximum distance.

Do any PGA players use graphite shafts?

Graphite iron shafts have been used by PGA TOUR professionals for decades including FedExCup Champion Brandt Snedeker and US Open Champion Bryson DeChambeau. There’s also a third option in iron shafts which may eventually fall into the “best of both worlds” category.

THIS IS EXCITING:  Can you drive a golf cart in NSW?

Why does Bryson use graphite shafts?

While the setup is unconventional, DeChambeau found the technology at LA Golf — his shaft outfitter — to be more stable and consistent than traditional steel. “A good graphite driver shaft should be just as stable and repeatable, or even more so, than steel,” DeChambeau told

Can you polish golf irons?

Apply any metal polish or car wheel polish to the golf clubs. Most polishes can be applied with a soft cloth or towel. Let them sit for a minute, then wipe the polish from the clubs. … Spraying or wiping the shafts with polish can also help protect against rust.

How do you get ball marks off irons?

In removing scuff marks, all you need to have is a white magic eraser and then rub it against your golf irons. This should solve your problem, and you’ll say goodbye to those scuff marks in no time.

How do I make my golf clubs shine like new?

Take a wet towel with a little dab of dish soap on it, and clean your golf club grip. Rinse with a clean wet cloth. Dry your club and club grip with a new clean dry cloth. Optionally, you can use some chrome polish or metal polish to polish the golf club shaft and face to help protect against rust.